Galco Walkabout J-Frame Holster

Galco Walkabout

I recently had the opportunity to check out a pretty cool concept from Galco. The basic idea is one that I have had in mind for a while – a holster with an attached speedloader pouch along the topstrap. Since the cylinder of the holster creates a bit of a “gap” in the pants anyhow, why not use that space to throw in a speedloader? Being forward of the gun it won’t interfere with the grasp or draw. The speedloader will be on the correct side of the body, and  (the speedloader typically being no thicker than the cylinder) won’t be any harder to hide than the gun itself. Well, that’s what the Galco Walkabout is. Let’s have a look at it.

The Galco Walkabout

The Galco Walkabout is an inexpensive leather IWB holster. The closest thing I had to compare this holster to before receiving it was the Tuck-N-Go I reviewed a few months ago. The execution in this design was a little lacking in my opinion. First, the compared to my Tuck-N-Go this holster seems a little floppy and cheap. The Tuck-N-Go has a reinforcing strip of heavy leather on the lower portion of the holster, wrapping around the barrel. This is probably in place simply as an attachment point for the belt clip, but it does offer the added benefit of making the whole thing a bit more rigid.

Galco Walkabout

Another thing about the holster portion of this holster that I dislike is the depth to which the gun sits. If you go back and look at that Tuck-N-Go article, you’ll notice the gun rides relatively high, seating only just past the recoil shield. In the Walkabout, the gun sits well down in the holster, making it hard to acquire a firing grip.  Finally, the holster is longer than it has to be. Though I didn’t have one on hand to test the theory, this rig would probably accommodate a 3″ J-Frame. I’d prefer to see this made with a bit more barrel-length specificity rather than a semi-universal fit.

The Speedloader Pouch

I was really excited to try the Galco Walkabout because of the speedloader pouch. The speedloader pouch on the Galco Walkabout consists of a leather basket with a Kydex insert. Initially I was very pleased with this but I couldn’t figure out why none of my speedloaders would seat deeply enough to close the pouch’s flap. I was using the smallest profile loader I had – a Safariland Comp I. At first I thought it was because I was using .357 Magnum ammo, so I switched to shorter .38 cartridges, but still – no joy. I finally realized that the Kydex insert was just exceptionally tight and I wasn’t inserting the cartridges deeply enough. So, I pushed really hard and the loader seated, and the flap closed.

Galco Walkabout

Problem solved! At least until I tried to remove the speedloader and the insert came out with it. I hadn’t noticed earlier, but it turns out the insert is attached to the leather basket by nothing more than some mild friction. Sadly, this creates an unacceptable risk of finding oneself unable to reload. My other complaint with the pouch is the flap. It is really short and difficult to open, especially considering the snap is seated inside your beltline. I think the solution would be a better fitment of the Kydex insert, and  attaching it to the holster. This would eliminate the need for a flap altogether.

Galco Walkabout

 

The Bottom Line

I don’t mean to bash this little holster but I’m not going to lie to you, either. The Galco Walkabout is an awesome idea. It puts the speedloader exactly where it should be, and mostly gets rid of excuses for not carrying one. But the execution on this one is terrible. Galco also makes this model for semi-autos, which is really disappointing. There is absolutely nothing to recommend that – a cheap holster that puts the magazine on the “wrong” side of the body. And it tells me this was probably an adaptation of the semi-auto version – not an example of innovation in the revolver world.

Galco Walkabout

Though the execution was off, I think Galco has the makings of a great concept. For this reason I’ve asked Nick of JOX Loader Pouches to build me an IWB speedloader pouch. My goal is to ride it in the same position as the Walkabout’s pouch. I’d love  to see some more Kydex benders making holsters with integrated pouches at this position, but I would recommend against buying this one.

Liked it? Support RevolverGuy on Patreon!

Become a Patron!

Author: Justin

Justin Carroll is a former MARSOC Marine and veteran of both Iraq and Afghanistan. Leaving service after eight years in the U.S. Marines, Justin continues his involvement with a variety of government agencies to this day. Justin began RevolverGuy.com in late 2016 with an simple idea: provide an source of high-quality information for revolver enthusiasts.

13 thoughts on “Galco Walkabout J-Frame Holster”

  1. Purely my take. I carry appendix IWB allot. I would be very skeptical about having brass cased ammo next to my body/skin (IWB). I live in Florida, and the opportunity for sweat to begin to erode & discolor brass cases & lead bullets would be huge.

    Even after carrying a speed strip in my left pocket I have seen the unwanted effects of body moisture on ammo. I finally went to using a speed strip holster (belt attached) from Grizzle. Awesome little device.

    1. I keep hearing good things about Grizzle – I’m going to have to get in touch with them!
      Thanks, Ron!

      1. Ryan is a SUPER guy to work with. He built me a speed strip holster in horsehide to match my holster for one of my SP101s. I am very picky about leather holsters,,, can’t say I admire anyone’s quality as much as I do Ryan’s.

  2. Looking at Galco’s description, the speedloader pouch is intended for HKS… Did you try one of those? I know they are made for the same weapon, but they are slightly different dimensions. The Safarilands, sadly, are not compatible with my LCR while the HKS works fine.

    1. I did try the HKS speedloader and had the same issue with the tight fit. I switched to the Comp I because even with the rounds fully seated in the Kydex insert I couldn’t get the flap closed.
      Bottom line – it doesn’t matter too much either way; since the insert isn’t attached to the “basket” I wouldn’t trust it unless it were too loose to do any good in the first place.

      1. Ok just thought I’d check. Seems like a case of “good idea, poor execution.” That’s a shame. I’m about ready to start making my own holsters.

        1. After numerous disappointments and outrageous price gouging from supposedly master holster makers I find myself going through the Tandy catalog.

  3. I’ve been using a couple of the Jox speedloader pouches for almost 2 years now, they are great and I really can’t see carrying speedloaders any other way now.

  4. It’s always disappointing when a great idea doesn’t work out. Having made a few holsters for myself that ended up that way, it can be frustrating. Sometimes I’m able to make adjustments and produce a workable solution and sometimes the idea is just flawed. It seems like this should be an example of the former. Better leather, a rivet to hold a better shaped kydex insert, and some minor tweaks in other areas should result in a holster that does what it needs to.

    I considered a making a somewhat similar holster at one point (I prefer offset attachment points, so I was going to approach things a little differently). This review (and another speedloader pouch project of my own) reinforces my belief that I would be best off by building a holster with a JOX loader attached than to make the holster and speedloader pouch. Sometimes my best results come from recognizing my limitations and working within them rather than trying to push my ability too far too fast.

  5. A small loctited bolt/screw and nut arrangement drilled through the bottom of the kydex insert and the leather strip would work wonders for securing the insert. It would also be situated in the dead space of the cartridges so it shouldn’t interfere with anything.

    1. Dan,
      I’ll be honest – the holster sucks so bad I haven’t really tried it much with anything. I would be especially loathe to try it with moon clips. Even a slight bend in a moon clip can lock your gun up very tightly. I would only carry a moon clip in something that provided adequate support or protection (like rigid leather or Kydex) to avoid damaging it.
      Justin

Comments are closed.