2026 Revolver Roundup AAR

The Revolver Faithful met again at Gunsite this past weekend, to participate in the 2026 Revolver Roundup, and a great time was had by all!

The event’s footprint was a little different this year, consisting of two days of training, instead of three, which was the byproduct of moving the event up a week, to avoid infringing on the Thanksgiving holiday. While we all missed the opportunity to send more rounds downrange on the third day, the reduced schedule made it much easier for some folks to attend, and it was also nice to get home with plenty of time to spare before the holiday rush.

let the fun begin!

The festivities started with the traditional Friday night barbecue, sponsored by Simply Rugged Holsters, Wilderness Tactical Products, Tuff Products, Rafter L Trucking, and America’s Finest Revolvers. Thank you to Rob, Sam, Nanci, Jon and Bryan for making that happen, because it’s always wonderful to greet our friends, make new ones, and kick off the weekend together.

I was super glad to see those vendors bring their tables back to the Roundup this year, so students could buy some quality revolver gear to run during the classes, and protect them and theirs at home.

A “controlled pair” of rainbows greeted us on Friday afternoon, before the barbecue

Saturday brought some rain and wind in the morning, but it didn’t stop the training. In a departure from last year, the students were programmed to spend an entire day with a single set of instructors, who would teach both the morning and afternoon sessions on the same range.  This arrangement simplified some of the logistics, and gave the instructors a chance to do a deeper dive into their topic. Additionally, they were able to provide more individual attention to each student with six hours together–something that can be hard to do, when you only have three hours with a student before they depart for another class.

It seems the Good Lord is a RevolverGuy, Himself. I took this as His promise that He would never let the flood of bottom-feeding, soulless, plastic self-chuckers destroy the perfectly round world of blue steel and walnut He had made for us. ; ^ )

instructors, Guns, Classes

The instructor lineup included the usual cast of characters, with the exception that Gunsite’s Freddie Blish had to substitute for Bruce Cartwright at the last minute, after the FAA’s nationwide ground stop left Bruce stuck without a ride. The ground stop also spoiled the plans of a number of students (we missed you!), and left us with a smaller crowd than we’re used to seeing at the event (somewhere in the mid-70s). The bonus, for those in attendance, is they received more individual attention from the staff, and didn’t have to fight for table space on the mess deck, at lunch.

They also had better odds of being the first in line to buy one of the exclusive revolvers that were stocked especially for the event by the Gunsite Pro Shop and Lipsey’s. I remember seeing several flavors of S&W Mountain Guns, some Ultimate Carry revolvers with Titanium cylinders, a Night Guard, a Model 19 Carry Comp, a super neat, bobbed-hammer, TALO edition Diamondback SDR, a 5″ half-lug GP100, and other great finds when I passed through there on Friday afternoon.  By Sunday afternoon, almost all of them had found a happy home.

Wayne Dobbs and Freddie Blish taught the Skills, Drills, and Diagnostics class on the North Range, while Lew Gosnell and Bryan Eastridge tackled the Big Bores (both double and single action) on Gunsite’s York Range. Caleb Giddings and Chuck Haggard ran the Performance Shooting course on the Shot Quad Range, and Dave Dolan and Cecil Burch taught the Fighting with Snubs program on the South Range.  Rounding things up were Mark Fricke and yours truly, teaching Keeping Round Guns in the Fight on the Hanakken Range.

Super Sunday

The students rotated on Sunday, to spend a full day with a new set of instructors. We got a break from the rain, but the fog that hung around until about Noon kept us in our warm jackets through lunch.

We had another full and fun day of training though, and before we knew it, it was time for us to shake hands and say our goodbyes until next year.

got feedback?

If you attended the Roundup, please be sure to comment below, and let everyone know what you thought of it.

I’d really be interested to hear your feedback about the new two-day footprint, and how it worked for you. Would you prefer to see a three-day event again? Did the two-day event, removed from Thanksgiving week, make it easier to attend? If you have some feedback about the six-hour training blocks, versus the older, three-hour blocks, please chime in about that too.

Is there a topic you’d like to see at future events? One that you’d like to see repeated? Would you like to add some classroom training back on the schedule, like we did in years past?  What did you think of the classes and instructors you trained with? What did you learn during the training? Let us hear from you!

see you in 2027?

The 2027 Gunsite Revolver Roundup is already on the books, scheduled for November 13-14.  The dust hasn’t settled on this weekend’s event yet, but after everyone catches their breath, the planning for next year will begin in earnest.

For more info about the 2027 Gunsite Revolver Roundup, visit https://www.gunsite.com

Like this year, Gunsite will host a 150 Basic Revolver class immediately before the Roundup next year, so students can get three days of excellent revolver training from Gunsite’s staff before rolling into the weekend event. This year’s 150 Basic Revolver class was sold out, so if that’s something you’d be interested in doing before the 2027 Roundup, make sure to submit your application early.

As always, I had a great time working, visiting, and shooting with everyone at the Roundup, and I’m eagerly looking forward to next year’s event. If you haven’t been to the Roundup yet, I hope you’ll be able to join us next November, because you don’t know what you’re missing.

Be safe out there!

 

Author: Mike

Mike is a bonafide revolver nut, and the Senior Editor at RevolverGuy.com. Mike's a retired Air Force pilot and a CA POST-certified law enforcement instructor, who regularly teaches classes for LE students throughout the state, and classes for armed citizens as well. Mike's the author of Newhall Shooting: A Tactical Analysis, the definitive study of the infamous, 1970 California Highway Patrol shootout in Newhall, California, and previously wrote the "Tactical Analysis" column at Police1.com for 8 years. He enjoys teaching, writing, and partnering with friends in the gun industry to both improve existing products, and create new ones for RevolverGuys to enjoy. He's grateful to have met so many great people through his writing and work in the industry, and appreciates the loyalty, interest, and participation of the RevolverGuy audience.

6 thoughts on “2026 Revolver Roundup AAR”

  1. Mike,
    The Roundup was a success for me! I did the fighting with snubbies class as well as the skills and drills classes. Both of them were very worthwhile. Learning occurred.
    I’d prefer the three-day format as well as separate AM and PM classes so as to see as many instructors as possible. As always, I enjoyed the fellowship and the chance to speak with “old friends” who I get to see once a year at the event. I hope the event at Gunsite continues, and continues to be well attended.

  2. Mike, I hated to miss the fellowship at the Roundup this year. I’m glad the Almighty made his presence known and smiled upon the good bunch of attendees, instructors, and vendors. There is a reason that Gunsite feels like holy ground! Glad it was a success despite the airline drama and the precipitation. I second R. Moore’s hope that the event continues to be well attended and takes place at Gunsite. I have no doubt that you and the rest of the cadre learned em well.

  3. Mike,

    I had a fine time at my 5th Roundup. It’s gradually changed for the better over the years, but may have overcorrected (for all sorts of good reasons) this year. Unlike others, I am not inconvenienced by the weekend before Thanksgiving dates, but had to choose between the Roundup and hunting with my family this year. Next year I’ll be hunting with the relatives.

    As good as the all-day sessions were (Big Bores and Keeping Roundguns in the Fight), each I attended were essentially two half-day courses with their own syllabus. Four choices instead of two would offer greater flexibility for frequent-fliers seeking new experiences. That said, there were several students with little to no experience who hadn’t attended the Gunsite 150R prior to class. They would have benefited from an all-day newbie curriculum (which I recall was offered in the past). At the other extreme there are some topics, such as Ken Campbell’s suggestion of a “Long Range Hunting Revolver,” which might benefit from being a two-day exercise. Range work on Saturday, outdoor simulators on Sunday.

    While the logistics are problematic for many, count me among those who miss the three-day event. Sims, quals, and the Jello shoot are nice wind down on Monday.

    Michael

    PS Allow me to gush a bit about your instructional block. Introducing us to decision making and defensive shooting under cognitive load (if there’s a shorter description let me know) is the best training I’ve had in ages. Any reader here who has a chance to train with you should do so.

    1. Michael, that’s super feedback, and I appreciate you taking the time to share it. I think you’ve landed on the most difficult nut to crack at these conferences–how do we deliver training that meets the needs of students at opposite ends of the experience ladder? How do we challenge advanced students, without leaving beginners in the dust?

      We’ve gotta find a better way to do that, and we’ve been brainstorming about how to accomplish it since we got home from RevolverFest. Your feedback is a good encouragement to keep at it.

      I also appreciate your thoughts about the three-day calendar. I missed the third day too, since it helps to make the round trip worth the effort. It’s a shame to travel for two full days (24+ hours of driving), and only get two days of training. The third day helps, but it’s only available during Thanksgiving week, because Gunsite starts its normal classes every Monday, and there’d be no space for us. Another issue is Gunsite has to pay staff at overtime rates on that Monday, which might drive up tuition.

      Many things to consider, but I appreciate you weighing in. Thanks also for your kind words about the class–I’m super glad you got so much out of it. I sure enjoyed working with you and all the other students on the range this year, instead of just the classroom!

Leave a Reply

Your email address will not be published. Required fields are marked *