RevolverGuy Privacy Policy

I recently published the RevolverGuy Privacy Policy. I don’t want this to get lost or overlooked, so I’m also publishing this as a post here. This isn’t boring legalese, so please take five minutes to read through it. If you like what you read, reach out to some more of your favorite sites and ask them if they’re taking care of you, too. Continue reading “RevolverGuy Privacy Policy”

The Perfect J-Frame: Two Years In Review

As the the sun sets on 2017, I wanted to talk about my experience with the perfect J-Frame Revolver: the S&W 640 Pro Series. I’ve carried this gun day-in/day-out for almost two and a half years now. It has been a special gun in that it has taught me an awful lot about the revolver. I’m going to talk about the accessories and solutions I’ve found to make this the most viable self-defense option possible, and my thoughts on going forward into the 2018. This will also be a bit of a reminisce over some of the changes I’ve made over the last year, and some things you can expect in the coming year. Continue reading “The Perfect J-Frame: Two Years In Review”

The Making of a RevolverGuy: My First Revolver

My first gun, not surprisingly, was a .22 rifle.  That seems to be where most of us start out, because it’s a lot easier to teach a youngster how to shoot a rifle than it is a handgun.  I always had a lot of fun with that rifle, but the time came when I wanted to shoot a handgun, instead.  I didn’t know it quite yet, but I was ready to take my first steps as a RevolverGuy. Continue reading “The Making of a RevolverGuy: My First Revolver”

A RevolverGuy Tribute to Skeeter Skelton

Skeeter Skelton once wrote that the only way to improve upon the Smith & Wesson Model 24 .44 Special would be to make it in stainless steel.  Soon after, S&W presented the Model 624, a .44 Special N-frame made from stainless instead of carbon steel.  I happened to have read Skeeter’s words a few days prior to walking into a local gun store that had a 624 in their used gun display.   It had the 4-inch barrel (6-inches was an option) and was wearing Pachmayr rubber grips.  The price was right with no box or papers and I became the new owner of my first .44 Special. Continue reading “A RevolverGuy Tribute to Skeeter Skelton”

Galco Walkabout J-Frame Holster

I recently had the opportunity to check out a pretty cool concept from Galco. The basic idea is one that I have had in mind for a while – a holster with an attached speedloader pouch along the topstrap. Since the cylinder of the holster creates a bit of a “gap” in the pants anyhow, why not use that space to throw in a speedloader? Continue reading “Galco Walkabout J-Frame Holster”

The Thumbs-Forward Revolver Grasp

As regular readers here know, I’ve taken up the revolver only recently. In years past I’ve carried the Beretta M9, the MEU(SOC) .45 1911, and the Glock 17 and 19 in harm’s way. I’ve invested hundreds of hours of training on these platforms, both at work and at my own expense. So when I made the switch from flat guns to round ones I tried to bring some of that knowledge with me, including how I grasp the gun. It turns out that I didn’t know what I didn’t know and inadvertently adopted the thumbs-forward revolver grasp.  Continue reading “The Thumbs-Forward Revolver Grasp”

The Ruger GP100 Match Champion

If you’ve been reading this blog for any length of time you’ve doubtlessly noticed that with the exception of Steve Tracy’s recent article, I haven’t given Ruger much love. That changes today! After Mike and I visited the Ruger factory in Prescott, we were generously offered access to T&E samples of Ruger revolvers – an offer we wasted no time taking them up on. The first gun I wanted to get my hands on is the one reviewed here: the GP100 Match Champion. Continue reading “The Ruger GP100 Match Champion”

A Review of the Tex Shoemaker Jordan Rig

Is there anything sweeter to a RevolverGuy than packing a classic revolver in a classic holster made out of premium leather? I have to admit that I spend more time carrying guns (bottom feeders, no less!) in polymer holsters these days, but my revolvers all ride in cow or horse hide. I won’t deny that modern chemistry has given us some wonderful materials to make belts and holsters from, but my round guns will always get holstered in leather, thank you very much.

Luckily for me, Justin understands this quirk in my nature. He might pack his 640 Pro in a polymer holster worn on a nylon riggers belt, but he still gets the fact that custom leather rigs are special, and that some guns deserve them. Recently, in a wonderful, RevolverGuy type of gesture, he gave me a Jordan holster for my cherished Smith & Wesson Combat Magnum. It’s a beautiful rig, and I’d like to give you a tour of it. Continue reading “A Review of the Tex Shoemaker Jordan Rig”

Fighting Leather: The Jordan Holster

The sands of time fall slowly through the neck of the hourglass at the border, and sometimes they stop entirely. Despite the progress made in other parts of the nation by the early part of the 20th Century, the border Southwest of the 1920s to 1940s looked virtually unchanged from the days before the Mexican-American War, almost a hundred years earlier (1846-48).  The endless revolutions, bandit wars, cross-border raids, smuggling, looting, livestock theft, lynchings, military invasions, murder, and “normal” border violence disproved any notion that the days of the “Wild West” were over. Continue reading “Fighting Leather: The Jordan Holster”

Mike Wood on The American Warrior Show

If you’re a Revolver Guy, you should know that Mike Wood was recently the guest of Mike Seeklander on the American Warrior Show. Mike was invited on to talk about the Newhall Shooting and he did a fantastic job. If you haven’t heard it, check it out HERE. And if you don’t know what the American Warrior Show is, keep reading! Continue reading “Mike Wood on The American Warrior Show”