The Safariland Comp II Speedloader

Safariland Comp II Speedloader

When I jumped headfirst in the world of wheel-fed guns, I knew I had to get good at reloads, and I knew that required a speedloader. I already owned a couple of HKSs and was thoroughly unimpressed with the “speed” claim in the name, and the multiple motions required to work them. The first speedloader I really learned to appreciate was the Safariland Comp II. This loader has also earned a ton respect from revolver guys who are far more accomplished than I.

Safariland Comp II Speedloader

There’s a lot to like about this loader. My favorite feature of the Safariland is its simplicity. The basic design of the loader makes it small, rugged, and reliable. There isn’t much to wear out on this thing. It also keeps the loader affordable; the going price for Comp IIs is somewhere between $10 and $15.

Safariland Comp II Speedloader

To load the Comp II up, invert it and drop the rounds in. While pressing down on them with the palm of one hand, push the knob in with the other and turn it clockwise until it clicks into place. To reload your revolver with the Comp II, align the cartridges with the charge holes and insert them until the loader stops. The center post will hit the cylinder pin. Press down on the body of the loader (NOT the knob) until you hear and feel a click. When the rounds release, drop the loader, close the cylinder, and get back to work.

Though sometimes accused of dropping rounds prematurely, I haven’t found this to be the case at all. In fact, I think it’s one of the more secure speedloaders on the market. A robust metal star inside the loader (see photo below) locks the rounds in place. Not only does this make them “drop safe” as Grant Cunningham elucidates, it also does a good job keeping the cartridges from rattling around. More importantly, it keeps them nice and straight for quick, easy alignment with the charge holes.

Safariland Comp II Speedloader

The Safariland Comp II is one of the smallest practical speedloaders out there, which is kind of hard to believe when you consider how well this thing actually works. There are other speedloaders that are much larger that I would never recommend. I carry my loaders in a JOX Loader pouch but if I were going to pocket carry it would be with a Comp II.

Safariland Comp II Speedloader

A couple weeks ago, Greg Ellefritz mentioned he maintains some beat-up revolvers (along with holsters and speedloaders) as “handout guns” for family members during crisis. I really like this idea and  think Comp II is ideal for this application. It’s reasonably fast, holds the rounds securely, and most importantly, is uncomplicated to operate. You could teach anyone how to use it in a matter of minutes. And it won’t cost you a fortune to buy a dozen of them.

Safariland Comp II Speedloader

Safariland Comp II Speedloader: The Bad

There isn’t much to complain about with the Comp II but my sole complaint is kind of a big one. Unlike the S.L. Variant and the JetLoader, this loader relies totally on gravity to transfer its payload. This means that you have to get the gun more or less vertical to allow rounds to drop in. It also means that with dirty or tight chambers, a round or two might fail to fully seat. A round sticking out even slightly means the cylinder won’t close until the problem is fixed. This is annoying at best, really frustrating during a competition, and downright dangerous when you’re on the two-way range. Still, the Comp II is a huge step up from twistie loaders and Speed Strips, and lightning fast reloads with them are possible with practice.

Safariland Comp II Speedloader

Oh, and the other thing: Safariland doesn’t make a huge lineup of Comp  IIs. If you have a 6-shot .38/.357 K- or L-Frame Smith, Ruger, or Colt (or a Brazilian “equivalent” of most-of-the-above), you should be good. If you’re packing something else…these probably ain’t for you. You can see the full catalog of Comp IIs on Safariland’s site.

The Bottom Line

The Safariland Comp II speedloader isn’t perfect. You have to get the gun vertical which ends up (for me) with head and eyes pointed straight at the deck. But at $10-15/each it’s inexpensive. It’s compact. It’s rugged and it holds rounds securely. And and it works, every time. Though I prefer the SL and Jet speedloaders, this one is in a very close third-place. I would recommend it without hesitation.

Liked it? Support RevolverGuy on Patreon!

Become a Patron!

Author: Justin

Justin Carroll is a former MARSOC Marine and veteran of both Iraq and Afghanistan. Leaving service after eight years in the U.S. Marines, Justin continues his involvement with a variety of government agencies to this day. Justin began RevolverGuy.com in late 2016 with an simple idea: provide an source of high-quality information for revolver enthusiasts.

5 thoughts on “The Safariland Comp II Speedloader”

  1. These are what I was trained on in the ’90s when I joined an armored car company that issued S&W M64s.. The comp 2 is still my preferred speedloader.

  2. I have used HKS (sp ?) speedloaders with no problems for years, but in the True Spirit of Never Leaving Well-Enough Alone, recently have decided to try the Comp II. I like it! The only problem I had was with the knob…it has a sharp edge that really caused discomfort for my extra-sensitive fingers. Some 80 grit sandpaper rounded the edge slightly, and provided a bit more “grip” for the extra-smooth knob.
    Btw, I really like your site…heard about it on the Stopping Power forums…bookmarked! Thank you!

  3. I’m a dedicated revolver guy and may even fit the label “old school” wheel gunner. I’ve used just about every speedloader out there. Many years ago I settled on the Safariland speedloaders and never looked back. It proved to be a good path to go down.
    I’ve heard all of the criticism concerning the Safariland Comp I and Comp II loaders (the Comp III is a different animal) and it’s all bunk.
    The Safariland Comp II will not release cartridges if dropped, It isn’t difficult to load, it isn’t fragile, they don’t cost a fortune and it IS faster than its main competitor – The HKS.
    The only downside to the Comp II is that it’s pretty much a internet order item and is not as easy to find in retail locations. It is also slightly more expensive than the HKS.
    MidwayUSA maintains the Safariland in stock and often puts them on sale.

    In terms of size, operation, cost and availability – there’s only two types of speedloaders for those of us that live in the real world: The Safariland Comp II and the Safariland Comp I.

    If you’re serious about training with a revolver, stop jumping around from one loader to the next like a jackrabbit. Get a supply for Comp II’s for your revolver and get rid of ALL of your other speedloaders. Dedicate yourself to training with the Safarilands and only go forward.

    1. Welcome to RevolverGuy! We’re fans of the Comps too, but wish they were available for more platforms. I’ve been lobbying contacts at Safariland to bring back the Colt D-Frame size, which would work great for the Kimber K6s and new Colt Cobra, but there’s no interest there. Too bad.

      For many guns out there, your only choice is HKS. Their extensive catalog is their greatest strength.

    2. So basically your advice seems to be stop doing my own research and go with what you like. The problem there is, I’m trying to review as many loaders as I can, for a wide-ranging audience with many different makes, models, and calibers of revolvers. I’m not “jumping around like a jackrabbit”, I’m writing reviews. I also have to review a bunch of different revolvers and speedloader carriers, and not all of them work with your favorite speedloader.
      With that being said I think the Safariland is fine, but it’s far from the best thing out there. I’ve settled on my preferred loader, and it ain’t the Safariland.
      – Someone Pretty Serious About Training With a Revolver

Comments are closed.