Why YOU Should Be Proficient with Double Action Revolvers

I frequently get the question, “why revolvers?” Using revolvers doesn’t make much sense to some, especially in today’s world of inexpensive, reliable, high-capacity semi-autos. However, I still contend that gun owners should be well rounded. This means that you – yeah, YOU! Over there with the HK V-whatever – should know how to operate a revolver proficiently. This post will probably mostly be preaching to the choir, but that’s OK – it might help you to answer the, “why revolvers?” question. My real hope is that you will direct the asker of that question here, so I can explain! Continue reading “Why YOU Should Be Proficient with Double Action Revolvers”

The Kimber K6s DC: Notes From The Field

The Kimber K6s revolver was introduced at the 2016 SHOT Show, and while I got to handle it in the Kimber booth, I didn’t get to shoot it until the following year’s Media Day at the Range. That first cylinder full convinced me that I was holding a very special gun, and would need to spend more time with it in the future. Continue reading “The Kimber K6s DC: Notes From The Field”

Ruger 10mm GP100, Part II: Field Report

The 10mm Auto is one of those cartridges with the capacity to capture the imagination like few others. Daydreams of charging feral pigs, scarcely trod trails, and pine-perfumed air are nearly inescapable when handling a 10mm. I fell under this spell years ago, and managed to break free for awhile…until the 10mm GP100 came along. The Centimeter GP was a pleasant surprise; I had given up hope of owning a duty-sized wheelgun in BESTmm. Handling and shooting this versatile revolver stokes a handgunner’s imagination like few other revolvers and suffice to say, I am a fan. This field report will explain why. Continue reading “Ruger 10mm GP100, Part II: Field Report”

PSA: .40 S&W in the 10mm GP100 Revolver

Since its unexpected introduction, I’ve seen a lot of articles and video reviews of the Ruger GP100 in 10mm. I’m not going to mention any names, but many of these have casually mentioned that you can shoot .40 S&W in the 10mm GP100. A couple articles from well-respected outlets have even cited the caliber as “10mm/.40 S&W” in the specifications (Ruger’s own specifications make no such claim). Continue reading “PSA: .40 S&W in the 10mm GP100 Revolver”

The Biggest Little Roundgun: The 3-Inch Kimber K6s

It is no secret to regular readers that I have been dying to get my hands on the 3-inch Kimber K6s. Thanks once again to the hard work of Mike and Steve, I finally got my chance to test out this revolver. This field report will cover my general impressions, and shooting and carrying what I have dubbed the “biggest little roundgun!” Continue reading “The Biggest Little Roundgun: The 3-Inch Kimber K6s”

Revolver Competition Gear – Competition Handgun I

If you haven’t read my AAR of Mike Seeklander’s Competition Handgun I, go check it out. I decided to cover equipment separately so as not to distract from the review of the excellent course. This post will cover the revolver competition gear used during the course. Continue reading “Revolver Competition Gear – Competition Handgun I”

The Kimber K6s: From a Blank Sheet of Paper

I admit it. I’m a gun nut. It doesn’t matter if they revolve or cycle, or if they load from the front, the back, or the bottom. It doesn’t matter if they hold a single cartridge or half a box full. It doesn’t matter if they’re made of blue steel and wood, or Tenifered steel and plastic. If they go “bang,” I love them.

Continue reading “The Kimber K6s: From a Blank Sheet of Paper”

Centimeter Revolver: Ruger 10mm GP100 Part I

Despite my recent daily-carry conversion, I love revolvers. I also think revolvers chambered for rimless pistol cartridges are downright neat. And, it just so happens, I am a long-time fan of the 10mm Auto. So it was no surprise that I almost jumped out of my seat when I opened an email from Mike containing a press release from Ruger. The Ruger 10mm GP100 Match Champion had just been released! Barely ninety seconds passed before I emailed my contact at Ruger…

Continue reading “Centimeter Revolver: Ruger 10mm GP100 Part I”

Things I’ll Miss About My Daily Carry Revolver

Choosing a concealed carry handgun is serious business. There are a host of factors to consider, including reliability, caliber, capacity, practical accuracy, and  the ever elusive “carryability”. There’s also a bunch more, but you get the idea. I don’t make such decisions lightly and I’ve recently made a pretty big one about my daily carry revolver. I’ve agonized about it, I’d driven Mike half mad endlessly reciting pro-and-con lists, and I spent hours at the range seeking some ballistic therapy… Continue reading “Things I’ll Miss About My Daily Carry Revolver”

In Praise of the Home Defense Revolver

I have been a little down on the concealed carry revolver lately. There are a lot of compromises to be made when selecting a revolver for everyday carry and I won’t rehash them here. There is one role in which the revolver shines, however. The home defense revolver suffers from very few of the problems that plague the everyday carry revolver. This post will take a look at a few of these benefits. Continue reading “In Praise of the Home Defense Revolver”